Grundig CR, CF, Party Center 1000 Flywheel Gear

Replacement of Flywheel Gear used in Grundig tape recorders and boom boxes.

 

Replacement gears were made of Nylon (a durable material that lasts for a long time) using high-precision 3D print.

There are two variants of the gear – the first one has no thread, it is fixed to the shaft using a retaining ring. The second variant has a thread for fixing to the flywheel.

The position of the gear in the assembly:

Gears were tested for correct operation.

The part is compatible with the following Grundig tape recorders and boom boxes:
PARTY CENTER 1000, RPC 1500, CF400, CR550, CR550A, CR560, CR580, CR585, CD585A, CR590.

It might work also with models – just check your service manual.

Available for purchase – go to shop.

Grundig CF5500 Winding Motor Gear

Replacement for Winding Motor Gear used in Grundig CF/MCF high-end tape recorders.

Winding Motor Gear

Replacement gear was made using thermoplastic polyurethane (high precision 3D print) that is slightly flexible as the original material and durable.

The part is compatible with the following Grundig tape recorders:
MCF 500, MCF 600, CF 5500, CF 5500-2.

It might work also with other cassette players – just check your service manual.

Available for purchase – go to shop.

Grundig CF7300 Servomotor gear (head carrier)

Replacement for Servomotor LW39 gear (head carrier) used in Grundig CF model tape recorders.

Servomotor gear position in the assembly

Replacement gears were made using thermoplastic polyuretane (high precision 3D print) that is slightly flexible as the original material and durable.

The part is compatible with following Grundig tape recorders:
CF 7000, CF 7100, CF 7200, CF 7300, CF 7400, CF 7500, CF 20, CF 30, CF 35, CF 303, SCF 1000.

It might work also with other cassette players – just check your service manual.

Available for purchase – go to shop.

Grundig MCF tape transport gears

Pinion and idler gear that acts in tape transport in Grundig MCF 100 and MCF 200 cassette players. The material used for original gears becomes fragile over time and gears often crack. Tape is not transported then.

Grundig MCF 100/200 gears (replaced)

Replacement gears are made using thermoplastic polyurethane (high precision 3D print) that is slightly flexible as the original material and durable.

The gears were tested for smooth operation.

How to replace the gears:

The part is compatible with the following devices:
Grundig MCF 100, MCF 200, CF 5000, CF 5000-2, CF 5100

It might work also with other Grundig cassette players – just check your service manual.

Available for purchase – go to shop.