Tascam 112 / 122 / 488 Gear set (Gear A, B, C)

3D printed replacement gear set for Tascam 112/122/488 tape recorders. The set consists of following gears:
5801474101 Gear A
5801474200 Gear B
5801474300 Gear C
The part numbers might vary for different Tascam models.

All gears were tested for correct operation.

Individual gears are available upon request.

Gear set is compatible with Tascam tape recorders 112MK2, 112RMK2, 122MK2, 122MK3, 488MK2.
It might be compatible with other models – just check your service manual.

Available in e-shop.

Philips FC144, D8634 balancer gear

3D printed replacement balancer gear for Philips FC144, D8634 tape recorders. The gear was made using semi-flexible material similar to the original one.

Tested for correct operation.

Gear is compatible with Philips tape recorders FC144, D8634, D8614, D8623, D8438, D8718, D8734, D6920.

Available in e-shop.

Philips DCC600 Spider Gear Set

3D printed replacement spider gear set for Philips DCC digital compact cassette recorders. The gears were made using semi-flexible material similar to the original one.

Tested for correct operation.

Position of the gear set in the tape transport assemlby

Gear set is compatible with Philips DCC recorders DCC600, DCC300, DCC380, FC910, FC930, DCC91. It can also be compatible with other DCC models and vendors (Grundig, Samsung,..), just check the service manual.

Available in e-shop.

Philips N5361, N5151 tape transport gear 482252010424

3D printed replacement tape transport gear 4822 520 10424 for Philips N 5361, N 5151, N5151 Mark II tape recorders. The gear was made using semi-flexible material similar to the original one. The gear needs to be replaced at the plastic thorn (that is not part of the offer).

Tested for correct operation.

Position of the gear in the assembly:

Gear may be compatible with additional Philips tape recorders (22AR774, 22AR584, N2415,…)

Available in e-shop.

Philips 70FC450 (S.E.3) Idler Gear

Idler gear is part of cassette mechanism “S.E.3/5556” in Philips 70FC450 tape recorder.

Philips S.E.3 idler gear (back and front side)

Faulty gear can be replaced with 3D printed one. Replacement gear was fully tested for correct operation.


Gear is compatible with Philips 70FC450.
However, it might work also with other devices – just check your service manual.

Available for purchase in e-shop.