Philips N 5361, N 5151 tape transport gear 482252010424

3D printed replacement tape transport gear 4822 520 10424 for Philips N 5361, N 5151 tape recorders. The gear was made using semi-flexible material similar to the original one. The gear needs to be replaced at the plastic thorn (that is not part of the offer).

Tested for correct operation.

Position of the gear in the assembly:

Available in e-shop.

Sony BU-30 CD drive sled motor gear (M102)

The gear is part of Sony CD Drive base unit BU-30 assembly. This drive is used in CD and VCD players. Base unit is marked BU-30BBD61M, A-4735-885-A. It is compatible with Aiwa BU-30 assembly.

Replacement part was created using a semi-professional 3D printer using durable Nylon material. The gear was tested for correct operation.

You can find the gear here in schematics:

Sony A-4735-885-A BU-30B Assembly


Gear is compatible with following Sony CD Players:
HCD-M333, MXD-D400, RCD-W2000ES, RCD-W10, RCD-W100, RCD-W222ES, RCD-W500C, RCD-W50C
However, it might work also with other devices – just check your service manual.

The gear is available in e-shop.
(gear only, without motor)

X33635011

Onkyo Toshiba Integra DVD’s FM01 79070421 Motor ass’y feed gear

The gear is part of DVD drive feed motor assembly. It is attached to feed motor (FM01 79070421) shaft in Onkyo, Integra, Toshiba and other DVD players. The gear can tend to crack during the time and DVD drive does not work correctly then.

Replacement part was created using a semi-professional 3D printer using durable Nylon material. The gear was tested for correct operation.

You can find the gear here in schematics:

the gear in assembly


Gear is compatible with following DVD Players:
Onkyo DV-S535, Onkyo DR-90, Onkyo DV-C600, Onkyo DV-S525, Integra DPS5, Toshiba SD-5109, Toshiba SD-2300.
However, it might work also with other devices – just check your service manual.

The gear is available in e-shop.
(gear only, without motor)

X33635011

Philips 70FC450 (S.E.3) Idler Gear

Idler gear is part of cassette mechanism “S.E.3/5556” in Philips 70FC450 tape recorder.

Philips S.E.3 idler gear (back and front side)

Faulty gear can be replaced with 3D printed one. Replacement gear was fully tested for correct operation.


Gear is compatible with Philips 70FC450.
However, it might work also with other devices – just check your service manual.

Available for purchase in e-shop.

JVC 185505303ZT Reel Motor Assy Gear

The gear is part of JVC 185505303ZT Reel Motor assembly. It is attached to reel motor shaft. The gear can tend to crack during the time and tape drive can become more noisy or does not work correctly.

Replacement part was created using a semi-professional 3D printer using durable Nylon material. You can find the gear here in schematics:

The gear in drive schematic


Gear is compatible with following JVC devices:
TD-X202.
However, it might work also with other devices – just check your service manual.

The gear is available in e-shop

X33635011