3D printed replacement bottom idler gear for Philips N 5361, N 5151, N5151 Mark II tape recorders. The gear was made using semi-flexible material similar to the original one.
Tested for correct operation.
Gear may be compatible with additional Philips tape recorders (22AR774, 22AR584, N2415,…)
Available in e-shop.
Replacement gear for Onkyo amplifier A-9510 motorized input selector. The gear is driven by a worm gear.
Replacement gear was tested for correct operation. It was created using a high precision 3D printer using durable Nylon material.
The gear might also fit into different Onkyo or Yamaha apmplifiers (? A-9511, A-9310 ?)
Product available in the e-shop
3D printed replacement idler gear for Philips N 5361, N 5151, N5151 Mark II tape recorders. The gear was made using semi-flexible material similar to the original one.
Tested for correct operation.
Gear may be compatible with additional Philips tape recorders (22AR774, 22AR584, N2415,…)
3D printed replacement tape transport gear 4822 520 10424 for Philips N 5361, N 5151, N5151 Mark II tape recorders. The gear was made using semi-flexible material similar to the original one. The gear needs to be replaced at the plastic thorn (that is not part of the offer).
Tested for correct operation.
Position of the gear in the assembly:
Gear may be compatible with additional Philips tape recorders (22AR774, 22AR584, N2415,…)
Available in e-shop.
The gear is part of Sony CD Drive base unit BU-30 assembly. This drive is used in CD and VCD players. Base unit is marked BU-30BBD61M, A-4735-885-A. It is compatible with Aiwa BU-30 assembly.
Replacement part was created using a semi-professional 3D printer using durable Nylon material. The gear was tested for correct operation.
You can find the gear here in schematics:
Gear is compatible with following CD Players:
Sony HCD-M333, Sony MXD-D400, Sony RCD-W2000ES, Sony RCD-W10, Sony RCD-W100, Sony RCD-W222ES, Sony RCD-W500C, Sony RCD-W50C, Sony CHC-CL3 (HCD-CL3), Sony CMT-M373NT (HCD-M373), Aiwa XR-MN5 (CX-LMN5), Aiwa XR-EM400 (CX-LEM400), Aiwa BMZ-K1 (CX-BK1).
However, it might work also with other devices – just check your service manual.
The gear is available in e-shop.
(gear only, without motor)
X33635011
The gear is part of DVD drive feed motor assembly. It is attached to feed motor (FM01 79070421) shaft in Onkyo, Integra, Toshiba and other DVD players. The gear can tend to crack during the time and DVD drive does not work correctly then.
Replacement part was created using a semi-professional 3D printer using durable Nylon material. The gear was tested for correct operation.
You can find the gear here in schematics:
Gear is compatible with following DVD Players:
Onkyo DV-S535, Onkyo DR-90, Onkyo DV-C600, Onkyo DV-S525, Integra DPS5, Toshiba SD-5109, Toshiba SD-2300.
However, it might work also with other devices – just check your service manual.
The gear is available in e-shop.
(gear only, without motor)
X33635011
Idler gear is part of cassette mechanism “S.E.3/5556” in Philips 70FC450 tape recorder.
Faulty gear can be replaced with 3D printed one. Replacement gear was fully tested for correct operation.
Gear is compatible with Philips 70FC450.
However, it might work also with other devices – just check your service manual.
Available for purchase in e-shop.
The gear is part of JVC 185505303ZT Reel Motor assembly. It is attached to reel motor shaft. The gear can tend to crack during the time and tape drive can become more noisy or does not work correctly.
Replacement part was created using a semi-professional 3D printer using durable Nylon material. You can find the gear here in schematics:
Gear is compatible with following JVC devices:
TD-X202.
However, it might work also with other devices – just check your service manual.
The gear is available in e-shop
X33635011
Gear that is part of CD Laser Assembly (probably Sanyo) used by Audiomedica Obsession High-end CD Player by Pierre Lurne.
Replacement gear was created using a precise 3D printer and tested for correct operation.
Available in e-shop.
